Target Adaptation AUTO26 to JTAG14 for RH850 |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-2700 | Conv. AUTO26 to JTAG14 RH850 |
Target Connector Type
Connector Type
- This is a standard 14 pin double row (two rows of seven pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".
Target Connector Pinout
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TCK | 1 |  |  | 2 | GND |
| TRST- | 3 | | | 4 | FLMD0 |
| TDO | 5 | | | 6 | (FLMD1) |
| TDI | 7 | | | 8 | VCC |
| TMS | 9 | | | 10 | (FLMD2) |
| RDY- | 11 | | | 12 | GND |
| RESET- | 13 | | | 14 | GND |
 | |||||
Signals FLMD1 and FLMD2 are optional target signals. On adapter side these pins are not connected.
Compatible Debug Cables
The following debug cables are compatible with this adapter:
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 07-Apr-2025 |
