MIPS Converter MIPS-14 to ARM-20 |
 
|
|||||
|
||||||
| ||||||
Target Adaptation for Converter MIPS-14 to ARM-20
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-2721 | Converter MIPS-14 to ARM-20 |
Target Connector Type
- This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
- Examples with housing: Samtec HTST-110-01-L-D (through-hole); Samtec HTST-110-01-L-DV (surface mount).
- Examples without housing: Samtec TSW-110-23-L-D; Berg 67996-120H
Interface Standard
The Debug Cable supports different interface standards:
The interface type and corresponding pin function can be selected in the debuggers GUI.
| 1 | JTAG | IEEE 1149.1 | alternate pin function: TMS, TCK |
| 3 | Compact JTAG | IEEE 1149.7 | alternate pin function: TMSC, TCKC |
| 2 | Serial Wire Debug | CoreSight ARM | alternate pin function: SWDIO, SWCLK |
The interface type and corresponding pin function can be selected in the debuggers GUI.
Pinout
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| VREF-DEBUG | 1 |  |  | 2 | VSUPPLY (not used) |
| TRST- | 3 | | | 4 | GND |
| TDI | 5 | | | 6 | GND |
| TMS|TMSC|SWDIO | 7 | | | 8 | GND |
| TCK|TCKC|SWCLK | 9 | | | 10 | GND |
| RTCK | 11 | | | 12 | GND |
| TDO|-|SWO | 13 | | | 14 | GND |
| RESET- | 15 | | | 16 | GND |
| DBGRQ | 17 | | | 18 | GND |
| DBGACK | 19 | | | 20 | GND |
 | |||||
|
Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 07-Mar-2024 |
