Adaptation for Converter AVR8 10 Pin JTAG to 6 Pin SPI |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
|
The debugger has a 10 pin connector and is connected via converter to 6 pin double row connector to the target.
| |||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-2732 | Converter AVR8 10 Pin JTAG to 6 Pin SPI |
Connector 6 pin
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TDO | 1 |  |  | 2 | VTREF |
| TCK | 3 | | | 4 | TDI |
| RESET- | 5 | | | 6 | GND |
 | |||||
Target Connector for Debugger Adaptation to 6 Pin SPI
Connector Type
- This is a standard 6 pin double row (two rows of 3 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 15.5mm/0.61".
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
