Converter AUTO26 to HDT+ |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-2782 | Converter for AUTO26 Debug Probe to AMD HDT+ | new product |
Pinout HDT+ Connector
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| VDDIO OR N/C | 1 |  |  | 2 | TCK |
| GND | 3 | | | 4 | TMS |
| GND | 5 | | | 6 | TDI |
| GND | 7 | | | 8 | TDO |
| TRST | 9 | | | 10 | PWROK |
| N/C OR RSV11 | 11 | | | 12 | RST |
| RSV13 | 13 | | | 14 | RSV14 |
| RSV15 | 15 | | | 16 | DBGREQ |
| GND | 17 | | | 18 | RSV18 |
| N/C OR VDDIO | 19 | | | 20 | RSV20 |
 | |||||
The signal assignment of pin 1, 11, and 19 can be set via jumpers. The first assignment labeled is the default setting as delivered.
Recommended Target Connector
| Pins | Samtec Order No | |
| 20 | FTSH-110-01-L-DV-K | |
 SAMTEC Connector DimensionsLink to SAMTEC
| ||
|
Copyright © 2026 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Apr-2026 |
