Converter Mictor38 (NEXUS) to JTAG14 for MPC55xx |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3725 | Conv. Mictor38 (NEXUS) to JTAG14 for MPC5xxx |
Converter Mictor38 (NEXUS) to JTAG14 for MPC55xx
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TDI | 1 |  |  | 2 | GND |
| TDO | 3 | | | 4 | GND |
| TCK | 5 | | | 6 | GND |
| N/C | 7 | | | 8 | N/C |
| RSTIN- | 9 | | | 10 | TMS |
| VREF | 11 | | | 12 | GND |
| RDY- | 13 | | | 14 | TRST- |
 | |||||
Dimension
- This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
