 Product
| Order No. | Probe |
|---|
| LA-3731 | Converter PPC4xx-16 to XILINX-14 | |
Target Connector Type (Xilinx-14)
Pinout
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| GND | 1 |  |  | 2 | VREF-DEBUG |
| GND | 3 | | | 4 | TMS |
| GND | 5 | | | 6 | TCK |
| GND | 7 | | | 8 | TDO |
| GND | 9 | | | 10 | TDI |
| GND | 11 | | | 12 | N/C |
| GND | 13 | | | 14 | N/C |
| | |  | | |
Connector Type
- This is a 14 pin double row (two rows of seven pins) connector (pin to pin spacing: 2.00mm).
JTAG Connector for MicroBlaze
| Order No. | Probe |
|---|
| LA-3730 | Debugger for MicroBlaze PPC16 (ICD) | not recommended for new projects |
| Order No. | Probe |
|---|
| LA-7723 | JTAG Debugger for PPC400 (ICD) | |
LA-3730 has the same pinout as LA-7723.
Connector 16 pin
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | | | | |
| TDO | 1 | | | 2 | N/C |
| TDI | 3 | | | 4 | TRST- (*) |
| N/C | 5 | | | 6 | VCCS |
| TCK | 7 | | | 8 | N/C |
| TMS | 9 | | | 10 | N/C |
| HALT- | 11 | | | 12 | N/C |
| N/C | 13 | |  | 14 | KEY |
| N/C | 15 | | | 16 | GND |
| | | | | |
- (*)Signal TRST not necessary for PPC403.
- All activ LOW signals need a pull-up. (10k recommended)
Dimension
Connector Type
- This is a standard 16 pin double row (two rows of eight pins) connector (pin to pin spacing: 0.100 in. / 2.54mm).
| 
