BDM Connector for ColdFire+/V1 |
 
|
|||||
|
||||||
| ||||||
Debugger Connector
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3746 | BDM Debugger for ColdFire+/V1 (ICD) |
Connector for BDM Debugger for ColdFire+/V1
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| BKGD | 1 |  |  | 2 | GND |
| N/C | 3 | | | 4 | RESET- |
| N/C | 5 | | | 6 | VCC |
 | |||||
The signal VCC on pin six is used to sense if the target has power and to adjust the output drivers to the target's voltage level.
Dimension
Connector Type
- This is a standard 6 pin double row (two rows of 3 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 12.5mm/0.5".
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
