Converter MIPI-34 to IDC20A / TI-14

Product

Order No.	Probe
LA-3771	Converter MIPI-34 to IDC20A/TI-14

Pinout Connector 20 pin (IDC20A)

Signal	Pin			Pin	Signal
VREF-DEBUG	1			2	VSUPPLY (not used)
TRST-	3			4	GND
TDI	5			6	GND
TMS|TMSC|SWDIO	7			8	GND
TCK|TCKC|SWCLK	9			10	GND
RTCK	11			12	GND
TDO|-|SWO	13			14	GND
RESET-	15			16	GND
DBGRQ	17			18	GND
DBGACK	19			20	GND

Dimension

• This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".

Pinout Connector 14 pin (TI)

Signal	Pin			Pin	Signal
TMS|TMSC|SWDIO	1			2	TRST-
TDI	3			4	GND
VREF-DEBUG	5			6	GND (KEY)
TDO|-|SWO	7			8	GND
RTCK	9			10	GND
TCK|TCKC|SWCLK	11			12	GND
EMU0	13			14	EMU1

Dimension

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".