Conv. Samtec40/COP16 to Samtec46 PowerOrg

Product

Target Connector Type

SAMTEC Part Number	Description
ASP-130368-01	Rugged High Speed Socket

Data Sheet
Link to SAMTEC

Target Connector Placement

• The adaption to the target is a 46 pin Samtec connector (Power.ORG pinout).

• The aurora signals (on the odd numbered side) can be easily routed to the processor
• The flex cable between Aurora preprocessor and target will not be twisted.

Pinout (Power.org HST-S46 compatible)

Signal	Pin			Pin	Signal
TXP0	1			2	JTAG-VREF
TXN0	3			4	TCK
GND	5			6	TMS
TXP1	7			8	TDI
TXN1	9			10	TDO
GND	11			12	TRST-
TXP2	13			14	(VENDOR-IO0)
TXN2	15			16	(VENDOR-IO1)
GND	17			18	(VENDOR-IO2)
TXP3	19			20	(VENDOR-IO3)
TXN3	21			22	PORESET-
GND	23			24	GND
(TXP4)	25			26	(CLKP)
(TXN4)	27			28	(CLKN)
GND	29			30	GND
(TXP5)	31			32	(VENDOR-IO4)
(TXN5)	33			34	(VENDOR-IO5)
GND	35			36	GND
(TXP6)	37			38	N/C
(TXN6)	39			40	N/C
GND	41			42	GND
(TXP7)	43			44	N/C
(TXN7)	45			46	N/C
Target connector, top-view, connect the two latch pins to GND

• Connect the two latch pins to GND.
• Signals in brackets are reserved for future use.

Debug Signals

• The target connects both trace and debug signals to the Samtec connector. As the adapter includes a 16-pin COP header for the debug cable, it can be used for debugging/tracing as well as for JTAG-only debugging.
• The target has separate connectors for tracing (Samtec46) and debugging (16-pin COP header).
• The target has separate connectors for tracing and debugging, but the debug signals are connected to both connectors. This solution is often found on evaluation boards because of it's flexibility, but in terms of JTAG signal integrity it is not recommended.

• JTAG-VREF, TCK, TMS, TRST-, TDI, TDO, RESET-.