Converter AUTO26/OnCE14/JTAG16-TC to ECU14 |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3843 | Conv. AUTO-26/OnCE14-PPC/JTAG16-TC to ECU14 |
Target Connector Type
| Pins | Samtec Order No | Connector Type |
| 10 | TFM-105-01-L-D | through-hole |
| 10 | TFM-105-02-L-D | surface mount |
 SAMTEC catalog page | ||
Target connector
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| GND | 1 |  |  | 2 | TCK/DAP0 |
| TRST-/JCOMP | 3 | | | 4 | TDO/DAP2 |
| TMS/DAP1 | 5 | | | 6 | TDI/DAPEN |
| USERIO | 7 | | | 8 | VTREF |
| RESETOUT- | 9 | | | 10 | RESET- |
 | |||||
Pin and Signal Considerations
- The RESETOUT- signal is optional.
- If the signal TRST/JCOMP is not available on the used processor/package type, leave the pin on the debug connector unconnected.
Adapter Configuration
- Pin 7 (USERIO) is configurable according to below table.
- NOTE: Set only one jumper at a time.
| Jumper | Signal connected to USERIO | Available with debug cables |
| J101: BRKO- | BRKOUT- EVTO- | LA-7756, LA-3737 LA-3736 |
| J102: BRKI- | BRKIN- EVTI- | LA-7756, LA-3737 LA-3736 |
| J103: OCDSE- | OCDSE- WDTDIS | LA-7756, LA-3737 LA-3736, LA-3737 |
| J104: VCC | VTREF (from target) | all |
| J105: GND | GND | all |
Compatible Debug Cables
| Order Nr. | Type | Connector |
| LA-7753 | JTAG Debugger for MPC5XXX/SPC5XX | OnCE connector |
| LA-3736 | JTAG Debugger for MPC5XXX/SPC5XX | AUTO26 connector |
| LA-7756 | OCDS Debugger for TriCore | 16-pin JTAG connector |
| LA-3737 | OCDS Debugger for TriCore | AUTO26 connector |
|
Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 07-Mar-2024 |
