ARM Converter ARM-20 to PPC-16


The embedded tools company


ARM Converter ARM-20 to PPC-16
  Introduction
Converter to connect a 20-pin ARM Debug Cable to 16-pin PowerPC connector (PPC4xx).

The converter connects the JTAG signals (TCK, TMS, TDO, TDI and TRST) from the Lauterbach debug cable to the connector on the target PCB.

The adapter is not only suitable for ARM. You can use it also for all architectures using the Lauterbach ARM debug cable like: ARM, ARC, AndesCore, Beyond, CEVA-X, MMDSP, TeakLite, TMS320Cxx, Xtensa, ZSP


Support
Technical Support

Product



Order No.Probe
LA-3860Converter IDC20A to PPC4xx-16 on request, please contact Lauterbach

Converter to connect a 20-pin ARM Debug Cable to 16-pin PowerPC connector (PPC4xx).

The converter connects only the JTAG signals TCK, TMS, TDO, TDI and TRST
which exist on both the ARM cable and the PowerPC connector.

The optional signals are connected to a separate pin-header on the converter.
Use this extra pin-header to connect to the signals
RTCK. SRST (system reset), DBGRQ, DBGACK from the ARM cable
and to signal HALT from the PowerPC connector.

Note: ARC users better use LA-3722 to connect to an ML-509 (XUPV5-LX110T) target board via the 38-pin mictor port, since the 16-pin header is mounted too close to the COM port on that board.


Pinout 16 Pin Connector

Signal

Pin

 Pin

Signal

    
TDO12N/C
TDI34TRST- (*)
N/C56VCCS
TCK78N/C
TMS910N/C
HALT-1112N/C
N/C1314KEY
N/C1516GND
    


(*)Signal TRST optional for normal JTAG test access ports.

">Signal HALT not directly connected to the debugger using the converter.


Target Connector Type



This is a standard 16 pin double row (two rows of eight pins) connector.

Pin to pin spacing is 2.54mm / 0.100in






Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024