ARM Converter ARM-20 to PPC-16

Order No.	Probe
LA-3860	Converter IDC20A to PPC4xx-16	on request, please contact Lauterbach

Converter to connect a 20-pin ARM Debug Cable to 16-pin PowerPC connector (PPC4xx).

The converter connects only the JTAG signals TCK, TMS, TDO, TDI and TRST
which exist on both the ARM cable and the PowerPC connector.

The optional signals are connected to a separate pin-header on the converter.
Use this extra pin-header to connect to the signals
RTCK. SRST (system reset), DBGRQ, DBGACK from the ARM cable
and to signal HALT from the PowerPC connector.

Note: ARC users better use LA-3722 to connect to an ML-509 (XUPV5-LX110T) target board via the 38-pin mictor port, since the 16-pin header is mounted too close to the COM port on that board.

Signal	Pin			Pin	Signal
TDO	1			2	N/C
TDI	3			4	TRST- (*)
N/C	5			6	VCCS
TCK	7			8	N/C
TMS	9			10	N/C
HALT-	11			12	N/C
N/C	13			14	KEY
N/C	15			16	GND

(*)Signal TRST optional for normal JTAG test access ports.

">Signal HALT not directly connected to the debugger using the converter.

This is a standard 16 pin double row (two rows of eight pins) connector.

Pin to pin spacing is 2.54mm / 0.100in