Converter IDC20A to ALTERA-10 / RISCV-10 |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TCK|TCKC|SWCLK | 1 |  |  | 2 | GND |
| TDO|-|SWO | 3 | | | 4 | VREF-DEBUG |
| TMS|TMSC|SWDIO | 5 | | | 6 | [RESET-] |
| N/C | 7 | | | 8 | [TRST-] |
| TDI | 9 | | | 10 | GND |
 | |||||
Note:
Pin 6 and Pin 8 are optional and can be selected/deselected by jumpers.
Pin 6 and Pin 8 are optional and can be selected/deselected by jumpers.
Dimension
Connector Type
- This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 20.5mm.
| Pins | Samtec Order No | |
|---|---|---|
 | 10 | FTSH-105-01-L-DV-K |
 Dimension 
 SAMTEC Connector Dimensions
| ||
|
Copyright © 2026 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 17-Jun-2026 |
