Converter IDC20A to UBI32-10 |
 
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3864 | Converter IDC20A to UBI32-10 |
Connector 10 pin
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| N/C | 1 |  |  | 2 | TMS |
| GND | 3 | | | 4 | TCK |
| N/C | 5 | | | 6 | N/C |
| GND | 7 | | | 8 | TDI |
| VTREF | 9 | | | 10 | TDO |
 | |||||
The debugger is connected via 10 pin double row connector to the target.
Target Connector Type
- This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 20.5mm.
|
|
||
 |
|
Copyright © 2026 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 16-Jun-2026 |
