Target Adaptation AUTO26 to NEXUS/Samtec50 for MPC5XXX/SPC5XXX |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3875 | Conv. AUTO26 to Samtec50 MPC5xxx |
Connector on Target
Pinout
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| MSEO0- | 1 |  |  | 2 | VREF |
| MSEO1- | 3 | | | 4 | TCK |
| GND | 5 | | | 6 | TMS |
| MDO00 | 7 | | | 8 | TDI |
| MDO01 | 9 | | | 10 | TDO |
| GND | 11 | | | 12 | TRST- (JCOMP) |
| MDO02 | 13 | | | 14 | DBGACK- (RDY) |
| MDO03 | 15 | | | 16 | EVTI- |
| GND | 17 | | | 18 | EVTO- |
| MCKO | 19 | | | 20 | RSTIN- |
| MDO04 | 21 | | | 22 | RSTOUT |
| GND | 23 | | | 24 | GND |
| MDO05 | 25 | | | 26 | CLKOUT |
| MDO06 | 27 | | | 28 | TD/WDTE |
| GND | 29 | | | 30 | GND |
| MDO07 | 31 | | | 32 | DAI1 |
| MDO08 | 33 | | | 34 | DAI2 |
| GND | 35 | | | 36 | GND |
| MDO09 | 37 | | | 38 | ARBREQ |
| MDO10 | 39 | | | 40 | ARBGRT |
| GND | 41 | | | 42 | GND |
| MDO11 | 43 | | | 44 | MDO13 |
| MDO12 | 45 | | | 46 | MDO14 |
| GND | 47 | | | 48 | GND |
| MDO15 | 49 | | | 50 | N/C |
 | |||||
| Target connector, top-view, connect the two latch pins to GND | |||||
Compatible Debug Cables
The following debug cables are compatible with this adapter:
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
