Conv. Mict38 ARM20 MIPI34 UART to MicroSD |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
|
| Pin | Signal | |
|---|---|---|
 | 1 | D2 |
| 2 | D3 |
| 3 | CMD |
| 4 | VCC |
| 5 | CLK |
| 6 | GND |
| 7 | D0 |
| 8 | D1 |
MicroSD Pinout for cJTAG Debug and 2-bit System Trace
Close the second and third solder bridge on the converter, only.
(The solder bridge closest to the PCB edge is the first one.)
(The solder bridge closest to the PCB edge is the first one.)
| Pin | Signal | |
|---|---|---|
| 1 | TRC-D2 |
| 2 | TRC-D3 |
| 3 | TRC-CTL |
| 4 | VCC |
| 5 | TRC-CLK |
| 6 | GND |
| 7 | TRC-D0 |
| 8 | TRC-D1 |
MicroSD Pinout for JTAG Debug
Close all six solder bridges on the converter.
|
|
Copyright © 2023 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 07-Aug-2023 |
