Adaptation for NXP JN51xx

Products

Order No.	Probe
LA-3890	Converter Beyond to NXP	on request, please contact Lauterbach

Connector 10 pin

Signal	Pin			Pin	Signal
TCK	1			2	GND
TDO	3			4	VTREF
TMS	5			6	NTRST
MISO	7			8	NRESET
TDI	9			10	GND

Target Connector 2.54mm for Debugger Adaptation for NXP

Dimension

Connector Type

• This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").

Target Connector Placement

• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 20.5mm.
• If the even numbered pins of the connector show to the edge of the PCB, then the flat cable goes straight off the PCB.

Target Connector 1.27mm (Half Size) for Debugger Adaptation for NXP

	Pins	Samtec Order No
	10	FTSH-105-01-L-DV-K
Dimension SAMTEC Connector Dimensions