Converter IDC20A to 10-pin FlashPro |
 
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-3891 | Converter IDC20A to 10-pin FlashPro |
Connector 10 pin
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TCK | 1 |  |  | 2 | GND |
| TDO | 3 | | | 4 | VREF-DEBUG |
| TMS | 5 | | | 6 | [RESET-] |
| N/C | 7 | | | 8 | [TRST-] |
| TDI | 9 | | | 10 | GND |
 | |||||
The debugger is connected via 10 pin double row connector 2.54mm or 1.27mm to the target.
Note:
Pin 6 and Pin 8 are optional and can be selected/deselected by jumpers.
Note:
Pin 6 and Pin 8 are optional and can be selected/deselected by jumpers.
Target Connector Type 2.54mm
- This is a standard 10 pin double row (two rows of 5 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 20.5mm.
Target Connector Type 1.27mm
| Pins | Samtec Order No | |
| 10 | FTSH-105-01-L-DV-K | |
 SAMTEC Connector DimensionsLink to SAMTEC | ||
|
Copyright © 2026 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 16-Jun-2026 |
