Conv. 38 Pin Mictor to 20 for Preproc. PPC4xx |
 
|
|
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe | |
|---|---|---|
| LA-7983 | Conv. 38 Pin Mictor to 20 for Preproc. PPC4xx |
Pinout Connector 20 pin
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| N/C | 1 |  |  | 2 | N/C |
| TRACECLK | 3 | | | 4 | N/C |
| N/C | 5 | | | 6 | N/C |
| N/C | 7 | | | 8 | N/C |
| N/C | 9 | | | 10 | N/C |
| N/C | 11 | | | 12 | ES4_TS1O |
| TS0_TS2O | 13 | | | 14 | TS1_TS1E |
| TS2_TS2E | 15 | | | 16 | TS3 |
| TS4 | 17 | | | 18 | TS5 |
| TS6 | 19 | | | 20 | GND |
 | |||||
Target Connector Dimension
- This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
