Adaptation for C166CBC/C166V2 Debugger via OCDS |
 
|
|||||
|
||||||
| ||||||
 |
 |
|
|
|
|
|
 Technical Support |
 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe |
|---|---|
| LA-7755 | OCDS Debugger for C166CBC (ICD) |
| LA-7759 | OCDS Debugger for XC2000/C166S V2 (ICD) |
Target Connector Type
- This is a standard 16 pin double row (two rows of 8 pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 25.5mm/1".
Pinout
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TMS | 1 |  |  | 2 | VCCS |
| TDO | 3 | | | 4 | GND |
| CPUCLOCK | 5 | | | 6 | GND |
| TDI | 7 | | | 8 | RESET- |
| TRST- | 9 | | | 10 | BRKOUT- |
| TCLK | 11 | | | 12 | GND |
| BRKIN- | 13 | | | 14 | N/C |
| N/C | 15 | | | 16 | GND |
 | |||||
Half-Size Adapter
|
|
||
 |
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
