Adaptation for CombiProbe MIPI60-Cv2

The adaptation applies for the following TRACE32® products

Converter

Picture

Order No.

Probe

LA-2725

Conv. MIPI60-Cv2 to MIPI60-C

Adaptation

LA-2727

Conv. Intel MIPI60-Cv2 to ARM MIPI34

Adaptation

LA-2728

Conv. Bundle Intel MIPI60-Cv2 to ARM 20

LA-3879

Conv. MIPI60-Q/MIPI60-Cv2 to XDP60

Adaptation

MIPI60-Cv2 of the TRACE32 CombiProbe

Not all pins of the MIPI60 Converged connector are connected to the MIPI60-Cv2 connector of the CombiProbe. The not connected pins are printed in gray.

Signal	Pin			Pin	Signal
VREF_DEBUG	1			2	TMS
TCK0	3			4	TDO
TDI	5			6	Reset Out
PMODE/Reset In	7			8	No Connect
TRST_N	9			10	PREQ_N
PRDY_N	11			12	VREF_TRACE
PTI_0_CLK	13			14	PTI_1_CLK
GND	15			16	GND
GND	17			18	PTI_1_DATA[0]
PTI_0_DATA[0]	19			20	PTI_1_DATA[1]
PTI_0_DATA[1]	21			22	PTI_1_DATA[2]
PTI_0_DATA[2]	23			24	PTI_1_DATA[3]
PTI_0_DATA[3]	25			26	No Connect
PTI_0_DATA[4]	27			28	No Connect
PTI_0_DATA[5]	29			30	No Connect
PTI_0_DATA[6]	31			32	No Connect
PTI_0_DATA[7]	33			34	No Connect
No Connect	35			36	Boot Stall
No Connect	37			38	CPU Boot Stall
No Connect	39			40	Power Button
No Connect	41			42	PWRGOOD
No Connect	43			44	No Connect
No Connect	45			46	No Connect
No Connect	47			48	I2C_SCL
No Connect	49			50	I2C_SDA
TCK1	51			52	reserved by TRACE32
HOOK[9]	53			54	DBG_UART_TX
HOOK[8]	55			56	DBG_UART_RX
GND	57			58	GND
No Connect	59			60	No Connect
Connect metal plate to GND

MIPI60 Converged

The picture below shows the MIPI60 Converged connector as specified by Intel®.

Signal	Pin			Pin	Signal
VREF_DEBUG	1			2	TMS
TCK0	3			4	TDO
TDI	5			6	HOOK[7]=Reset Out
HOOK[6]=PMODE/Reset In	7			8	10 kOHM to GND
TRST_N	9			10	PREQ_N
PRDY_N	11			12	VTREF_TRACE
PTI_0_CLK	13			14	PTI_1_CLK
POD_PRESENT1_N	15			16	GND
POD_PRESENT2_N	17			18	PTI_1_DATA[0]
PTI_0_DATA[0]	19			20	PTI_1_DATA[1]
PTI_0_DATA[1]	21			22	PTI_1_DATA[2]
PTI_0_DATA[2]	23			24	PTI_1_DATA[3]
PTI_0_DATA[3]	25			26	PTI_1_DATA[4]/PTI_2_DATA[0]
PTI_0_DATA[4]	27			28	PTI_1_DATA[5]/PTI_2_DATA[1]
PTI_0_DATA[5]	29			30	PTI_1_DATA[6]/PTI_2_DATA[2]
PTI_0_DATA[6]	31			32	PTI_1_DATA[7]/PTI_2_DATA[3]
PTI_0_DATA[7]	33			34	No Connect
PTI_0_DATA[8]/PTI_3_DATA[0]	35			36	HOOK[3]=Boot Stall
PTI_0_DATA[9]/PTI_3_DATA[1]	37			38	HOOK[2]=CPU Boot Stall
PTI_0_DATA[10]/PTI_3_DATA[2]	39			40	HOOK[1]=Power Button
PTI_0_DATA[11]/PTI_3_DATA[3]	41			42	HOOK[0]=PWRGOOD
PTI_0_DATA[12]/PTI_3_DATA[4]	43			44	No Connect
PTI_0_DATA[13]/PTI_3_DATA[5]	45			46	No Connect
PTI_0_DATA[14]/PTI_3_DATA[6]	47			48	I2C_SCL
PTI_0_DATA[15]/PTI_3_DATA[7]	49			50	I2C_SDA
TCK1	51			52	No Connect
HOOK[9]	53			54	DBG_UART_TX
HOOK[8]	55			56	DBG_UART_RX
GND	57			58	GND
PTI_3_CLK	59			60	PTI_2_CLK
Connect metal plate to GND

Target Connector Type

Pins	Samtec Order No	Connector Type	Samtec ASP Nr.
60	QSH-030-01-L-D-A-K	high speed ground plane socket	- - - - -
SAMTEC catalog page

Cables for Connection to Target

Order-Nr.	Type
LA-1228	140 mm flex ext. for SAMTEC 60 pin QTH-QSH series
LA-1238	330 mm flex ext. for SAMTEC 60 pin QTH-QSH series long
Replacement flex extension can be ordered separately.