Target Adaption for TI DSP C6000 Trace (cTOOLS)
 Target Connector
The adaption could use one 38 pin MICTOR connector or one 60pin SAMTEC connector on the target.
ETM-CON
Tyco Electronics WWW Site
|
Tyco part number | Description |
| 2-5767004-2 | Vertical, surface mount, board to board/cable connector. |
| 767054-1 | Vertical, surface mount, board to board/cable connector. |
| 767061-1 | Vertical, surface mount, board to board/cable connector. |
| 5767044-1 | Right angle, straddle mount, board to board/cable connector. |
Mictor cTOOLS pinout with ENABLE
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| N/C | 1 |  |  | 2 | N/C |
| N/C | 3 | | | 4 | N/C |
| N/C | 5 | | | 6 | ETKCLK |
| DBGRQ | 7 | | | 8 | DBGACK |
| SRST- | 9 | | | 10 | N/C |
| TDO | 11 | | | 12 | ETK-VTREF |
| RTCK | 13 | | | 14 | JTAG-VTREF |
| TCK | 15 | | | 16 | ETKDATA7 |
| TMS | 17 | | | 18 | ETKDATA6 |
| TDI | 19 | | | 20 | ETKDATA5 |
| TRST- | 21 | | | 22 | ETKDATA4 |
| GND | 23 | | | 24 | ETKDATA3 |
| GND | 25 | | | 26 | ETKDATA2 |
| GND | 27 | | | 28 | ETKDATA1 |
| GND | 29 | | | 30 | GND |
| GND | 31 | | | 32 | GND |
| GND | 33 | | | 34 | VCC |
| ETKDATA9 | 35 | | | 36 | ENABLE |
| ETKDATA8 | 37 | | | 38 | ETKDATA0 |
| | |  | | |
| Connect Pin 39,40,41,42 and 43 to GND |
Mictor cTOOLS pinout without ENABLE
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | | | | |
| N/C | 1 | | | 2 | N/C |
| N/C | 3 | | | 4 | N/C |
| N/C | 5 | | | 6 | ETKCLK0 |
| DBGRQ | 7 | | | 8 | DBGACK |
| SRST- | 9 | | | 10 | N/C |
| TDO | 11 | | | 12 | ETM-VTREF |
| RTCK | 13 | | | 14 | JTAG-VTREF |
| TCK | 15 | | | 16 | ETKDATA7 |
| TMS | 17 | | | 18 | ETKDATA6 |
| TDI | 19 | | | 20 | ETKDATA5 |
| TRST- | 21 | | | 22 | ETKDATA4 |
| GND | 23 | | | 24 | ETKDATA3 |
| GND | 25 | | | 26 | ETKDATA2 |
| GND | 27 | | | 28 | ETKDATA1 |
| GND | 29 | | | 30 | ETKDATA0 |
| GND | 31 | | | 32 | ETKCLK1 |
| GND | 33 | | | 34 | VCC |
| GND | 35 | | | 36 | ETKDATA9 |
| GND | 37 | | | 38 | ETKDATA8 |
| | | | | |
| Connect Pin 39,40,41,42 and 43 to GND |
|
Target Adaption for TI DSP C6000 Trace (cTOOLS)
