Adaptation for M-CORE ONCE Connector

Connector 14 pin

Signal	Pin			Pin	Signal
TDI	1			2	GND
TDO	3			4	GND
TCLK	5			6	GND
(GPIO-SI-)	7			8	N/C
RESET-	9			10	TMS
VDD TARGET	11			12	DE-
(!GPIO-SO)	13			14	TRST-

• Signals in brackets are not strong necessary for basic debugging, but its recommended to take in consideration for future designs.

Schematics

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

	Half-Size Adapters for Debuggers 100 mil to 50 mil Adapters Small Footprint for Target Connector