BDM Debug-Interface Connector for MPC500/800 |
 
|
|||||
|
||||||
| ||||||
Debugger Connector
 |
 |
|
|
|
|
|
 Technical Support |
 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Connectors for MPC500/800| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| VFLS0\FREEZE | 1 |  |  | 2 | SRESET-\RESETIN- |
| GND | 3 | | | 4 | DSCK |
| GND | 5 | | | 6 | VFLS1\FREEZE |
| RESETOUT-\HRESET- | 7 | | | 8 | DSDI |
| VDD | 9 | | | 10 | DSDO |
 | |||||
The two signal names on pin 2 and 7 have the same physical meaning. Only the use of the names differs between MPC500 and MPC800.
Dimension
Connector Type
- This is a standard 10 pin double row (two rows of five pins) connector (pin to pin spacing: 2.54mm/0.100").
- If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 18mm/0.710".
Half-Size Adapters for Debuggers
|
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 27-Mar-2025 |
