Adaptation for RX

Target Connector for Debugger Adaption for RX

Target Connector 14 pin

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Pinout

Signal	Pin			Pin	Signal
TCK	1			2	GND
TRST-	3			4	(EMLE)
TDO	5			6	(MDE)
(MD1)	7			8	VCC
TMS	9			10	(MD0)
TDI	11			12	GND
RESET-	13			14	GND

Target Connector for Debugger Adaption on MICTOR for RX

Target Connector MICTOR 38 pin (requires Converter LA-3789)

Target Connector Type

AMP/Tyco order number: 2-5767004-2 (RoHS compliant)

Data Sheet
Link to Tyco Electronics

Pinout

Signal	Pin			Pin	Signal
(MDE)	1			2	(MD0)
(EMLE)	3			4	N/C
N/C	5			6	N/C
N/C	7			8	(MD1)
RESET-	9			10	N/C
TDO	11			12	N/C
N/C	13			14	VCC
TCK	15			16	N/C
TMS	17			18	N/C
TDI	19			20	N/C
TRST-	21			22	N/C
N/C	23			24	N/C
N/C	25			26	N/C
N/C	27			28	N/C
N/C	29			30	N/C
N/C	31			32	N/C
N/C	33			34	N/C
N/C	35			36	N/C
N/C	37			38	N/C
Connect Pin 39,40,41,42 and 43 to GND

Target Connector for Debugger and Trace Adaption on MICTOR for RX

Target Connector MICTOR 38 pin (requires Converter LA-3792)

Target Connector Type

AMP/Tyco order number: 2-5767004-2 (RoHS compliant)

Data Sheet
Link to Tyco Electronics

Pinout

Signal	Pin			Pin	Signal
(MDE)	1			2	(MD0)
(EMLE)	3			4	N/C
N/C	5			6	AUDCK
N/C	7			8	(MD1)
RESET-	9			10	N/C
TDO	11			12	N/C
N/C	13			14	VCC
TCK	15			16	N/C
TMS	17			18	N/C
TDI	19			20	N/C
TRST-	21			22	N/C
N/C	23			24	AUDATA3
N/C	25			26	AUDATA2
N/C	27			28	AUDATA1
N/C	29			30	AUDATA0
N/C	31			32	AUDSYNC-
N/C	33			34	N/C
N/C	35			36	N/C
N/C	37			38	N/C
Connect Pin 39,40,41,42 and 43 to GND