Target Adaptation for StarCore

Connector 20 pin (recommended for new designs)

Signal	Pin			Pin	Signal
VREF-DEBUG	1			2	VSUPPLY (not used)
TRST-	3			4	GND
TDI	5			6	GND
TMS|TMSC|SWDIO	7			8	GND
TCK|TCKC|SWCLK	9			10	GND
RTCK	11			12	GND
TDO	13			14	GND
RESET-	15			16	GND
DBGRQ	17			18	GND
DBGACK	19			20	GND

Target Connector for Debugger Adaptation for StarCore 20 pin

Dimension

Connector Type

• This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".

Connector 14 pin

Signal	Pin			Pin	Signal
TDI	1			2	GND
TDO	3			4	GND
TCK	5			6	GND
N/C	7			8	KEY
RESET-	9			10	TMS
VCCS	11			12	N/C
N/C	13			14	TRST-

Target Connector for Debugger Adaptation for StarCore 14 pin

Dimension

Connector Type

• This is a standard 14 pin double row (two rows of 7 pins) connector (pin to pin spacing: 2.54mm/0.100").
• If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 23mm/0.9".

Layout

StarCore Connector pin-out Mictor38 (M38C) Debugger Combined Target Connector Connector 1 Signal Pin   Pin Signal         N/C 1 2 N/C N/C 3 4 N/C GND 5 6 MCKO DBGRQ 7 8 MRDY RSTIN- 9 10 EVTI- TDO 11 12 VTREF RTCK 13 14 N/C TCK 15 16 MDO07 TMS 17 18 MDO06 TDI 19 20 MDO05 TRST- 21 22 MDO04 MDO15 23 24 MDO03 MDO14 25 26 MDO02 MDO13 27 28 MDO01 MDO12 29 30 GND MDO11 31 32 EVTO- MDO10 33 34 MSEO1- MDO09 35 36 MSEO0- MDO08 37 38 MDO00         Connect Pin 39,40,41,42 and 43 to GND Connector 2 (>16-bit) Signal Pin   Pin Signal         N/C 1 2 N/C N/C 3 4 N/C GND 5 6 N/C N/C 7 8 N/C N/C 9 10 N/C N/C 11 12 N/C N/C 13 14 N/C N/C 15 16 TRACEDATA23 N/C 17 18 TRACEDATA22 N/C 19 20 TRACEDATA21 N/C 21 22 TRACEDATA20 TRACEDATA31 23 24 TRACEDATA19 TRACEDATA30 25 26 TRACEDATA18 TRACEDATA29 27 28 TRACEDATA17 TRACEDATA28 29 30 GND TRACEDATA27 31 32 GND TRACEDATA26 33 34 VCC TRACEDATA25 35 36 GND TRACEDATA24 37 38 TRACEDATA16         Connect Pin 39,40,41,42 and 43 to GND

Order No

AMP part numbers for suitable receptacles (for target)

AMP 2-5767004-2 RoHS compliant
AMP 2-767004-2
AMP 767054-1 (suggested by Motorola)
AMP 767061-1
AMP 767044-1 : Board-to-Board Type: Coplanar

Tyco Electronics

Probe

Probe dimensions

Half-Size Adapters for Debuggers

100 mil to 50 mil Adapters Small Footprint for Target Connector