TRACE32 Hardware that Supports the Analog Probe
|
|
- 4 GByte trace memory
- Universal module that is prelicensed for a trace protocol on delivery, additional trace protocol licenses can be added
- Aurora-based trace protocols up to 8 RX lanes, up to 12.5 Gbit/s per lane
- Speed booster TRACE32 Preprocessor Aurora 2 delivers up to 22.5 Gbit/s per lane for up to 4 lanes
- PCIe 3.0-based trace protocol up to 8 RX/TX lanes, up to 8 Gbit/s per lane
- Maximum bandwidth of 100 GBit/s
- Reference-clock and bit-clock support
- Fast trace upload to the host computer
- Support for TRACE32 Streaming up to 400 MByte/s
- TRACE32 Standard Probe/Analog Probe option
|
 | |
|
|
- 1, 2 or 4 GByte trace memory
- Fast trace upload to the host computer
- Maximum bandwidth of 19.2 GBit/s
- Universal trace module, connect to target via TRACE32 AutoFocus II or TRACE32 Serial Preprocessor
- Support for parallel trace ports with up to 32-bit
- Support for serial trace ports up to 4 lanes
- Support for TRACE32 Streaming up to 180 MByte/s, compression allows higher data rates to be achieved
- TRACE32 Standard Probe option
- TRACE32 Analog Probe option
|
| |
|
|
- Timing Analyzer with 500 MHz on all Channels
- State Analyzer up to 200 MHz DDR
- 204 Input Channels
- Transient Recording
- Time Correlation with other Tracetools
- Clock Qualifier for State Clock
- Mixed State and Timing Mode
- 4 Clock Inputs
- MICTOR and Standard Probes (single ended)
- MICTOR differential Probes
- Analog Voltage and Current Probe
- 3G/DigRF Protocol Support
|
| |
|
Signal
| Pin
| | Pin
| Signal
|
|---|
| | |  | | |
| I2- | 1 |  |  | 2 | GND |
| I2+ | 3 | | | 4 | GND |
| I1- | 5 | | | 6 | GND |
| I1+ | 7 | | | 8 | GND |
| I0- | 9 | | | 10 | GND |
| I0+ | 11 | | | 12 | GND |
| V3 | 13 | | | 14 | GND |
| V2 | 15 | | | 16 | GND |
| V1 | 17 | | | 18 | GND |
| V0 | 19 | | | 20 | GND |
| | |  | | |
|
TRACE32 Hardware that Supports the Analog Probe
