| | | | |
|  | About the TRACE32 Online Help | 05-Nov-2024 | Removed manual 'Run Mode Debugging Manual QNX' (rtos_qnx_run.pdf). |
| 04-Nov-2024 | Removed manuals: 'Arm Application Note for MXC Chips' (app_arm_mxc.pdf). 'Training Arm CoreSight ETM Tracing' (training_arm_etm.pdf). |
| 04-Nov-2024 | Removed manual: 'Modifying Xilinx ML605 for Direct JTAG Access' (app_ml605.pdf). |
| 04-Nov-2024 | Removed manual: 'MAC71xx/72xx NEXUS Debugger and Trace' (nexus_mac.pdf). |
| 04-Nov-2024 | Removed manuals: 'Tools for Intel(r) x86/x64' (tools_intel_x86.pdf). 'Training Linux Debugging for Intel(r) x86/x64' (training_rtos_linux_x86.pdf). |
| 04-Nov-2024 | Removed manuals: 'EPROM/FLASH Simulator' (eprom_simulator.pdf). 'LIN Bus Protocol Analyzer' (linbus_app.pdf). |
| 04-Nov-2024 | Removed manual: 'StarCore Application Note for MXC Chips' (starcore_mxc_app.pdf). |
| 04-Nov-2024 | Removed manuals: 'Training Basic Debugging' (training_debugger.pdf). 'Training Basic SMP Debugging for Intel(r) x86/x64' (training_debugger_x86.pdf). |
| 04-Nov-2024 | Removed manuals: 'Training AURIX Tracing' (training_aurix_trace.pdf). 'Training Power Probe' (training_pp.pdf). |
| 05-Aug-2024 | Removed manual: 'Arm ETM Programming Dialog' (trace_arm_etm_dialog.pdf). |
| 05-Aug-2024 | Removed manual: 'Establish Your Debug Session' (tutor_setup.pdf). |
| 02-Aug-2024 | Removed manual: 'Training Simulator and Demo Software' (demo.pdf). |
| 01-Aug-2024 | Removed manuals: 'Stimuli Generator Function Reference' (stg_func.pdf), 'Stimuli Generator Reference Guide' (stg_ref.pdf), 'Stimuli Generator User's Guide' (stg_user.pdf). |
| 30-Jul-2024 | Manual renamed from 'Training Nexus Tracing' (training_nexus.pdf) to 'Training MPC5xxx/SPC5xx Nexus Tracing' (training_nexus_mpc5500.pdf). |
| 15-Apr-2024 | Removed manual: 'DigRF Protocol Analyzer' (digrf_app.pdf). |
| 29-Mar-2024 | Manual 'Arm JTAG Interface Specifications' (app_arm_jtag.pdf) has been replaced by an updated manual entitled 'Arm Debug and Trace Interface Specification' (app_arm_target_interface.pdf). |
| 22-Mar-2024 | Removed Monitor manuals. |
| 30-Jun-2023 | New manual: 'Application Note Profiling on AUTOSAR CP with ARTI' (app_autosar_cp_arti.pdf). |
| 12-Jun-2023 | The 'TRACE32 Glossary' (glossary.pdf) manual has been split into two manuals: 'TRACE32 Terminology' (trace32_terms.pdf) and 'TRACE32 Concepts' (trace32_concepts.pdf). |
| 12-Jun-2023 | Removed manual: 'OS Awareness Manual RTOS/7700' (rtos_rt7700.pdf). |
| 24-May-2023 | Manual file renamed from 'Training Source Level Debugging' (training_hll.pdf) to 'Training Source Level Debugging' (training_source_level_debugging.pdf). |
| 16-Dec-2022 | Manual renamed from 'Training JTAG Interface' (training_jtag.pdf) to 'Application Note JTAG Interface' (app_jtag_interface.pdf). |
| 08-Jun-2022 | New manual: 'Application Note for Complex Trigger Language' (app_ctl.pdf). |
| |
| | Andes Debugger | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | API for Remote Control and JTAG Access in C | 20-Jun-2023 | Updated T32_APILock and T32_APIUnlock. |
| 21-Dec-2022 | Marked T32_ReadMemory, T32_WriteMemory, T32_ReadRegister, T32_WriteRegister, T32_ReadBreakpoint, and T32_WriteBreakpoint as deprecated functions. |
| |
| | Application Note Debug Cable TriCore | 18-Apr-2023 | New section 'DXCM Target Configuration'. |
| |
| | Application Note for Complex Trigger Language | 15-Aug-2024 | Added subchapter 'CTL for Arm ETM'. |
| 15-Feb-2023 | Added onchip CTL support for miniMCDS. |
| 29-Jun-2022 | Initial version. |
| |
| | Application Note for t32cast | 22-Aug-2023 | Update chapter 't32cast Operations Overview'. |
| 22-Aug-2023 | Chapter 'Naming Conventions added'. |
| 18-Apr-2023 | Added commands for source code instrumentation. |
| |
| | Application Note for Trace-Based Code Coverage | 29-Jan-2025 | In the chapter 'Code Coverage Measurement', the measurement details for both incremental code coverage variants and continuous code coverage in RTS mode updated. |
| 17-Jan-2025 | Chapter 'Steps in Preparation for Code Coverage Measurement' updated. |
| 17-Jan-2025 | Chapter 'Selecting the Right Code Coverage Measurement Variant' updated. RTS code coverage now supports all source metrics. A chapter about TRACE32 Trace Tool solutions for code coverage added. |
| 08-Aug-2024 | Since statement coverage, decision/condition/MCDC coverage, and function/call coverage are preferably evaluated in a web browser, the evaluation chapters for TRACE32 have been removed. |
| 08-Aug-2024 | Chapter 'Build Process' revised. |
| 10-Jul-2024 | Description of --filelist parameter added to chapter 'TRACE32 Merge and Report Tool'. |
| 02-Jul-2024 | 'Notes on Statement Coverage' added to chapter 'Statement Coverage Workflow'. |
| 02-Jul-2024 | 'Notes on Branch Coverage' added to chapter 'Code Coverage and Certification'. |
| 19-Jun-2024 | Chapter 'Introduction' revised. |
| 29-May-2024 | Subchapter 'Evaluation of Switch Case Statements' added to chapter 'MC/DC, Condition and Decision Coverage'. |
| 26-Jan-2024 | The manual has been completely revised to integrate the new code coverage modes targeted and full instrumentation. |
| 07-Sep-2023 | EN50128 (railway) added to 'Trace-Based Code Coverage and Certification'. The chapter now also lists the safety levels and the TRACE32 tool classification of the individual standards. |
| |
| | Application Note JTAG Interface | 23-Dec-2022 | In the chapter 'Remote API' UDP was replaced by TCP. Solaris was removed as supported host OS. |
| 13-Dec-2022 | Manual was renamed. The old name was training_jtag.pdf. |
| |
| | Application Note Profiling on AUTOSAR CP with ARTI | 03-Oct-2023 | DAP Streaming for miniMCDS in chapter 'TriCore Bus Trace' added. |
| 01-Aug-2023 | PowerDebug E40/PRO/X50 and AUTO26 Debug Cable added as second configuration for TriCore DAP Streaming. |
| 05-Jul-2023 | Initial version of the manual. |
| |
| | ARC Debugger and Trace | 16-Jun-2023 | Chapter 'Legacy MIPI60-C Connector' was removed. |
| 17-Jan-2023 | Added SETUP.DIS command. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| 07-Jun-2022 | New command: JTAG.CONFIG.TckRun. |
| |
| | Arm Debug and Trace Interface Specification | 22-Mar-2024 | Fully revised version. |
| 15-Mar-2024 | Changed the file name from app_arm_jtag.pdf to app_arm_target_interface.pdf. |
| |
| | Arm Debugger | 06-Mar-2024 | New command SYStem.Option.SLaVeSOFTRESet. |
| 19-Aug-2022 | Link to manual XCP Debug Back-End added in chapter' Brief Overview of Documents for New Users'. |
| 15-Jun-2022 | New subchapter 'XCP Specific Commands', describes the XCP subcommands of SYStem.CONFIG. |
| |
| | Arm ETM Trace | 08-Jul-2022 | New commands: ETM.CycleCountTickEnable and ETM.CycleCountTickRate. |
| |
| | Armv8 and Armv9 Debugger | 21-Aug-2024 | New options relating to the Realm Management Extension (RME) for TrOnchip.state command. |
| 20-Aug-2024 | New subchapter 'Cache Attributes'. |
| 20-Aug-2024 | New subchapter 'Realm Management Extension (RME)'. |
| 20-Feb-2024 | New command SYStem.Option.SoftLockUNLOCK. |
| 14-Feb-2024 | Link to manual 'CSWP Debug Back-End' (backend_cswp.pdf) added in chapter ' Brief Overview of Documents for New Users'. |
| 16-Nov-2023 | SYStem.Option.MemStatusCheck command has been extended to include new options. |
| 27-Oct-2023 | Added Cache and TLB support for Cortex-A520, Cortex-A720, Cortex-X3 and Cortex-X4 CPUs. |
| 17-Feb-2023 | New command SYStem.Option.FunctionalRESet. |
| 24-Jan-2023 | SYStem.CPU command updated. |
| 24-Jan-2023 | 'Cache Analysis and Maintenance' chapter revised. |
| 24-Jan-2023 | 'TRACE32 TLB Support by CPU Type' section has been updated, by adding the support for Cortex-A78C, Cortex-A715, and Cortex-X1C CPUs. |
| 01-Sep-2022 | New command SYStem.Option.CTIGate. |
| 19-Aug-2022 | Link to manual XCP Debug Back-End added in chapter' Brief Overview of Documents for New Users'. |
| 15-Jun-2022 | New subchapter 'XCP Specific Commands', describes the XCP subcommands of SYStem.CONFIG. |
| |
| | Beyond Debugger and Trace | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | C2000 Debugger | 08-Jan-2025 | New command SYStem.Option.CLeaRRAMOPEN. |
| 23-Dec-2024 | New command SETUP.DIS. |
| 30-Jul-2024 | New command SYStem.Option.DUALPORT. |
| 02-May-2023 | New commands: SYStem.Option.EnReset, SYStem.Option.EnTRST, and SYStem.Option.KEYCODE. |
| 23-Nov-2022 | New command SYStem.Option.ExecutionMode. |
| |
| | C7000 Debugger and Trace | 29-Mar-2024 | New command SYStem.Option.MACHINESPACES. |
| 18-Mar-2024 | New command SYStem.Option.ICFLUSH. |
| 28-Apr-2023 | New command SETUP.DIS. |
| 07-Apr-2023 | Removed command SYStem.Option.PWRCHECK. |
| |
| | Cortex-M Debugger | 31-Jul-2023 | Chapter 'Products for Debugging and Tracing Cortex-M Cores' updated for latest configurations. |
| 20-Jul-2023 | Chapter 'Breakpoints' fully revised. |
| 28-Nov-2022 | New command SYStem.Option.CLEARHARDFAULT. |
| 14-Nov-2022 | New command SYStem.Option.CFLUSHAFTERBREAK. |
| 05-Oct-2022 | New commands BMC.ON and BMC.OFF. |
| 19-Aug-2022 | Link to manual XCP Debug Back-End added in chapter' Brief Overview of Documents for New Users'. |
| 06-Jul-2022 | New command SYStem.Option.FORCESECure. |
| 15-Jun-2022 | New subchapter 'XCP Specific Commands', describes the XCP subcommands of SYStem.CONFIG. |
| |
| | CPU32/ColdFire Debugger and Trace | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | CSWP Debug Back-End | 12-Feb-2024 | Initial version of the manual. |
| |
| | Debugger Tutorial | 05-Jun-2024 | Revised manual. |
| |
| | Floating Licenses | 02-May-2024 | New chapter 'License Roaming'. |
| 02-Oct-2023 | Reprise links in chapter 'License Management Server' updated. |
| 05-Sep-2023 | The general conditions for the TRACE32 Simulator License described in more detail in chapter 'TRACE32 Simulator License as Base License'. |
| |
| | General Commands Reference Guide A | 20-Jan-2025 | New command Analyzer.TimeSort. |
| 13-Jan-2025 | Analyzer.PROfile command group has been removed. |
| 14-Oct-2022 | Updated description of Analyzer.TraceCLOCK. |
| |
| | General Commands Reference Guide B | 25-Nov-2024 | New command Break.SetTaskMAGIC. |
| 25-Nov-2024 | New command Break.DeleteTaskMAGIC. |
| 08-Apr-2024 | New option /TraceEnableEnable for the command Break.SetFunc. |
| 11-Mar-2024 | New option /TraceEnable for the command Break.SetFunc. |
| 20-Jul-2023 | New option /OnchipDetail for the command Break.List. |
| 18-Jan-2023 | New option /SPOT for the command Break.SetFunc. |
| 07-Oct-2022 | Information about task-aware real-time breakpoints for Cortex-X, Neoverse and RISC-V has been added to the description of the Break.Set command. |
| |
| | General Commands Reference Guide C | 27-Jan-2025 | New option /Tag for command COVergae.EXPORT.JSONE. |
| 27-Jan-2025 | New option /NoISTAT for commands COVerage.EXPORT.JSON and COVergae.EXPORT.JSONE. |
| 15-Jan-2025 | Command COVerage.Option.StaticInfo updated. |
| 14-Jan-2025 | Command COVerage.ADD updated. |
| 21-Oct-2024 | New command COVerage.Option.IGNORELINEAR. |
| 08-Oct-2024 | New command COVerage.Option.IGNOREINF. |
| 20-Sep-2024 | Description for command COVerage.Option.IGNOREDEAD added. |
| 09-Jul-2024 | Added a description for the /StripSource option in the COVerage.EXPORT.JSONE. |
| 28-Jun-2024 | Description for command group COVerage.EXPORT updated. Format overview updated, with a focus shifted to COVerage.EXPORT.JSONE. |
| 04-Jun-2024 | Description for command COVerage.INFO added. |
| 25-Jan-2024 | Description for command COVerage.EXPORT.JSONE updated. |
| 08-Dec-2023 | Removed command CTS.UseCache. |
| 07-Dec-2023 | Removed CTS.UseReadCycle and CTS.UseWriteCycle commands and replaced them by CTS.UseDataTrace. |
| 07-Dec-2023 | Removed CTS.UseVM command and replaced by CTS.UseStartMemory. |
| 04-Dec-2023 | Renamed CTS.UseMemory to CTS.UseFinalMemory. Renamed CTS.UseRegister to CTS.UseFinalContext. |
| 10-Oct-2023 | Clean-up of CAnalyzer description. |
| 31-Jul-2023 | TriCore DAP streaming via AUTO26 V3 debug cable has been added as a configuration for the CAnalyzer command group. |
| 18-Apr-2023 | Updated description of COVerage.TreeWalkSETUP and subcommands. |
| 20-Mar-2023 | Added uTrace (MicroTrace) with MIPI34 whisker to the list of setups that support advanced AutoFocus features to match software since build 156270, DVD 09/2023. |
| |
| | General Commands Reference Guide D | 13-Jan-2025 | Update of the command Data.PROfile. |
| 05-Nov-2024 | Data.dump option /NoHex renamed to /NoValues. |
| 21-Oct-2024 | New option /UNZIP for Data.LOAD.Elf. |
| 21-Oct-2024 | New option /LOADONDEMAND for Data.LOAD.Binary, Data.LOAD.CORE and Data.LOAD.Elf. |
| 12-Aug-2024 | The Data.GREP command has been renamed to GREP and is now documented in general_ref_g.pdf. |
| 26-Jun-2024 | New option /NoCODEAT for Data.LOAD. |
| 21-Feb-2023 | Removed /FASTPACK option for Data.LOAD.AIF, Data.LOAD.COFF, Data.LOAD.DBX, Data.LOAD.Elf, Data.LOAD.Icoff, Data.LOAD.Ieee and Data.LOAD.SDS. |
| 21-Feb-2023 | Removed /TURBOPACK option for Data.LOAD.ROF. |
| 21-Nov-2022 | Removed /PACK option for Data.LOAD.COFF, Data.LOAD.DBX and Data.LOAD.Ieee. |
| 21-Nov-2022 | New options for Data.LOAD.Elf: /PREFIX, /RELOCSTRIPPED, /NOLINKAGENAME, /FILTERBYCORE. |
| 01-Nov-2022 | New options for Data.LOAD.Elf: /CODEPROG, /DWOFILES, /DWPFILE, /NOARGCOERCE, /NODEBUG, /NODEBUGFRAME, /NOEHFRAME, /NODOUBLE and /IgnoreModuleRange. |
| 22-Aug-2022 | New option /IgnoreFUNCLines for Data.LOAD.Elf command. |
| 05-Jul-2022 | New option /Append for Data.SAVE.IntelHex command. |
| |
| | General Commands Reference Guide F | 16-Dec-2024 | Added RISC-V-specific details to the FPU.Set command. |
| 22-Mar-2024 | New commands FLASHFILE.LOAD.JSON, FLASHFILE.LOAD.SPARSE, and FLASHFILE.MMC.GETHealth. |
| 26-Jun-2023 | New option /SpotLight for the command FLASHFILE.DUMP. |
| 17-Mar-2023 | New command FLASHFILE.ReProgram. |
| 28-Jul-2022 | New command FLASHFILE.Delete. |
| |
| | General Commands Reference Guide I | 12-Dec-2023 | New command ITM.DataTraceCorrelatePusher. |
| |
| | General Commands Reference Guide J | 12-Dec-2023 | New feature JTAG.SEQuence.MemAccess.ADD to access memory via JTAG sequences. |
| |
| | General Commands Reference Guide L | 22-Apr-2024 | New option /NoExec for LA.IMPORT.TARMAC command. |
| 25-Mar-2024 | New option /COVerableItems for List.EXPORT.auto and List.EXPORT.Mix commands. |
| 23-Feb-2024 | New command LA.IMPORT.TARMAC. |
| |
| | General Commands Reference Guide M | 22-Oct-2024 | New option /HVTrap for MCDS.Option.eXception TABLE command. |
| 01-Oct-2024 | New command MCDS.StatusTrace.Agents. |
| 25-Mar-2024 | New command MAP.BUS3264. |
| 27-Nov-2023 | Command MCDS.Option.TTRESet has been removed. |
| 27-Nov-2023 | Command MCDS.TimeStamp has been marked as deprecated and replaced by the new command MCDS.TImeMode. |
| 27-Nov-2023 | New command MCDS.Option.RESetBehavior. |
| 23-Aug-2023 | New command MCDS.TargetAgents.CLEAR. |
| 09-Aug-2022 | New command MAP.BUS64. |
| 05-Aug-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | General Commands Reference Guide P | 14-Jan-2025 | New commands PERF.CORE and PERF.ListGROUP. |
| 13-Jan-2025 | Update of the command PERF.PROfile. |
| 10-Jan-2025 | Command PERF.RunTime has been renamed to PERF.RunTimeLimit. Command PERF.METHOD SNOOP renamed to PERF.METHOD RealTime. |
| 06-Jan-2025 | Command PERF.MMUSPACES has been renamed to PERF.CONFIG.MMUSPACES. |
| 06-Jan-2025 | Command PERF.UseContextID has been renamed to PERF.CONFIG.UseContextID. |
| 06-Jan-2025 | Commands PERF.ListFuncMod and PERF.ListRange have been removed. |
| 18-Nov-2024 | Options /PCTASK and /PCMEMory of the PERF.Mode command have been renamed to /PC+TASK and /PC+MEMory, respectively. |
| 18-Nov-2024 | Command PERF.ContextID has been renamed to PERF.UseContextID. |
| 23-Feb-2024 | New command PER.Set.CONDitions. |
| 31-Oct-2023 | New command PER.IMPORT.ModulePath. |
| 11-Oct-2023 | PERF.METHOD command: the list of CPUs that allow reading the program counter while the program is running has been deleted. The function CPU.FEATURE(PCSNOOP) is used to check this. |
| 28-Aug-2023 | New command PER.<format>.TestProgram. |
| 21-Jul-2023 | New command PER.IMPORT.SortTopTrees. |
| 07-Apr-2023 | New PER.IMPORT command group. |
| 05-Aug-2022 | New /AccessClass option for PERSVD commands. |
| |
| | General Commands Reference Guide R | 24-Apr-2023 | The RunTime command group has been reworked. The new command is now a trace sink. |
| 22-Aug-2022 | New command RunTime.WAIT. |
| |
| | General Commands Reference Guide S | 30-Jan-2025 | Updated SNOOPer.Mode. Introduced SNOOPer.CONFIG commands. |
| 10-Jan-2025 | New command SYStem.MCDLIBrary. |
| 30-Dec-2024 | New command sYmbol.LSTLOAD.COSMIC. |
| 16-Dec-2024 | The command description for SETUP.DIS now includes the <constants> parameters specific to RISC-V. |
| 24-Oct-2024 | New option /RunControl for SystemLOG.Set command. |
| 21-Oct-2024 | SYStem.LOG command group has been renamed to SystemLOG. |
| 11-Oct-2024 | Command SETUP.BreakTransfer has been removed. |
| 21-Aug-2024 | New command SYStem.CONFIG.VrefTHreshold. |
| 30-Jul-2024 | New command SIM.ConditionTraceInfo. |
| 26-Jun-2024 | New command SIM.BreakBeforeMake. |
| 26-Mar-2024 | New command sYmbol.ECA.BINary.EXPORT.AdJoinGAPS. |
| 19-Feb-2024 | Description for sYmbol.AutoLOAD.List updated. |
| 24-Oct-2023 | Description for SYStem.CONFIG.DEBUGPORT updated. |
| 16-Oct-2023 | Description for sYmbol.ECA.BINary.PROCESS updated. |
| 16-Oct-2023 | New command sYmbol.ECA.BINary.ControlFlowMode.INSTR, sYmbol.ECA.BINary.ControlFlowMode.Trace and sYmbol.ECA.BINary.EXPORT.GAPS. |
| 23-Aug-2023 | New command sYmbol.List.Enum. |
| 19-May-2023 | Updated the window sYmbol.ECA.List by introducing a new checkbox LENient and replacing the column Time with signature. |
| 26-Apr-2023 | Renamed sYmbol.ECA.BINary.EXPORT to sYmbol.ECA.BINary.EXPORT.Decisions. |
| 12-Aug-2022 | New option /WinTOP for the command STOre. |
| 28-Jul-2022 | Updated description of sYmbol.MATCH Best. |
| |
| | General Commands Reference Guide T | 30-Dec-2024 | New command TASK.UseContextID. |
| 21-Oct-2024 | New command TCB.PseudoDataTrace. |
| 22-May-2024 | A more detailed description of the <trace>.STATistic.TASKState command. |
| 26-Sep-2023 | New commands <trace>.PROfile.channel and <trace>.PROfile.CTU. |
| 13-Jul-2023 | Moved the option /ARTIAP from <trace>.FLOWPROCESS to the command <trace>.STATistic.PROCESS. |
| 13-Jul-2023 | New command <trace>.EXPORT.MDF. New option /TimeZero for the command <trace>.EXPORT.ARTI. |
| 21-Jun-2023 | Added the TRIG connector characteristics on PowerDebug X50 in chapter 'Overview TrBus'. |
| 06-Jan-2023 | New method <trace>.METHOD.CIProbe. |
| 30-Aug-2022 | Added the TRIG connector characteristics on PowerDebug E40 in chapter 'Overview TrBus'. |
| 11-Aug-2022 | New modes for TERM.Mode command to support UTF-8 encoded characters. |
| 05-Aug-2022 | New option /Clear for TRANSlation.SCANall command. |
| 19-Jul-2022 | New option /BEAT for <trace>.List command. |
| 12-Jul-2022 | New command TRACEPORT.LanePolarity. |
| |
| | General Commands Reference Guide V | 13-Jan-2025 | Update of the command Var.PROfile. |
| 17-Dec-2024 | Details on handling of long variable names in TRACE32 in chapter 'Overview Var' updated. |
| 23-Jan-2023 | VPU commands support different architectures other than PowerPC. |
| |
| | General Function Reference | 12-Sep-2024 | New function PER.NAME(). |
| 28-Aug-2024 | Removed function: hardware.STG(). |
| 21-Aug-2024 | New function: STATE.VREF() and SYStem.CONFIG.VrefTHreshold(). |
| 15-Jul-2024 | New function SYStem.Option.WDTSUS(). |
| 27-May-2024 | New functions Trace.STATistic.FIRST() and Trace.STATistic.LAST(). |
| 13-May-2024 | New function COVerage.IDLE(). |
| 08-May-2024 | New functions COMPonentNAME() and COMPonentNUMBER(). |
| 03-May-2024 | New function TERM.NEWHANDLE(). |
| 27-Mar-2024 | New function ID.POWERTRACEAUXPORT(). |
| 25-Jan-2024 | New function sYmbol.ECA.BINary.GAPNUMBER(). |
| 20-Nov-2023 | New function COVerage.Percentage(). |
| 21-Aug-2023 | New function Register.Valid(). |
| 06-Jun-2023 | New function VERSION.SOFTWARE.TYPE(). |
| 05-Jun-2023 | New function PER.BASE(). |
| 02-May-2023 | New functions: Analyzer.CONFIG.POWERTRACESERIAL2() and hardware.POWERTRACESERIAL2(). |
| 18-Apr-2023 | New optional parameter for Symbol.SOURCEFILE(). |
| 20-Feb-2023 | New functions: ID.SERialPort1() and VERSION.SERIAL.SERialPort1(). |
| 18-Nov-2022 | New function: PBI(). |
| 18-Nov-2022 | New functions: VERSION.SERIAL.Integrator, VERSION.SERIAL.NEXUSadapter, and VERSION.SERIAL.POWERPROBE. |
| 02-Nov-2022 | All hardware functions are now grouped in the chapter 'Hardware Functions'. The descriptions have also been updated. |
| 22-Aug-2022 | New THUMB parameter for CPU.FEATURE() function supported by the Arm architecture. |
| |
| | GTM Debugger and Trace | 05-Dec-2022 | Support for S32 and SR6 CPUs. New subchapter 'S32 and SR6 Architecture - Quick Start'. New 'Arm Specific TrOnchip Commands', for S32 only. |
| |
| | Hexagon Debugger | 29-Mar-2024 | New command SYStem.Option.MACHINESPACES. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Integration for Simulink | 28-Mar-2024 | Add QT version conflicts to 'Troubleshooting', page 34. |
| 23-Jan-2024 | Add support for Linux. |
| 23-Jan-2024 | Installer executable is replaced by MATLAB toolbox. |
| |
| | Intel® x86/x64 Debugger | 07-Jun-2022 | New command: JTAG.CONFIG.TckRun. |
| |
| | MCDS User's Guide | 23-Aug-2022 | Chapter 'Complex Trigger Language CTL' with link to 'Application Note for Complex Trigger Language' (app_ctl.pdf) added. |
| |
| | MicroBlaze Debugger and Trace | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | MSP430 Debugger | 19-Dec-2023 | SYStem.Mode Attach and SYStem.Mode NoDebug are no longer available. |
| |
| | NIOS II Debugger and Trace | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | OS Awareness Manual MTOS-UX | 04-Feb-2021 | Removed legacy command TASK.TASKState. |
| |
| | OS Awareness Manual OSEK/ORTI | 17-May-2022 | New option /SMP for the command TASK.D<object>. |
| |
| | OS Awareness Manual QNX | 07-Feb-2024 | New functions: TASK.QVM.NAME() and TASK.QVM.VMLIST(). |
| |
| | Peripheral Files Programming | 14-Sep-2022 | New feature inherit for REPEAT command. |
| |
| | PowerView Command Reference | 03-Dec-2024 | New pre-command WinGlue. |
| 19-Sep-2024 | New modes for SETUP.RADIX: WideDecimal, WideHEx, and WideStrict. |
| 23-Aug-2024 | New command group DebugModule. |
| 09-Aug-2024 | New commands: CONNECTION.ETHernet.DETection.Filter.CLEAR, and CONNECTION.ETHernet.DETection.Filter.set. |
| 09-Aug-2024 | New commands: CONNECTION.ETHernet.DETection.DISable, CONNECTION.ETHernet.DETection.ENable, and CONNECTION.ETHernet.DETection.View. |
| 08-Aug-2024 | New command SETUP.API.SIMULINK.Enable. |
| 30-Jul-2024 | Reworked on SETUP.API.TCF commands: SETUP.API.TCF.ON renamed to SETUP.API.TCF.Enable. SETUP.API.TCF.OFF has been removed. SETUP.API.TCF.PORT has been removed. |
| 30-Jul-2024 | Reworked on SETUP.API.GDB commands: SETUP.API.GDB.ON renamed to SETUP.API.GDB.Enable. SETUP.API.GDB.OFF has been removed. |
| 30-Jul-2024 | new command SETUP.API.RCL.Enable. |
| 05-Jun-2024 | New command groups SETUP.API.TCF and SETUP.API.GDB. |
| 01-Jun-2024 | New command group CONNECTION. |
| 02-May-2024 | New options /COUNT and /ROAM for the command LICENSE.REQuest. |
| 24-Aug-2023 | Updated command HELP.Index. |
| 13-Jul-2023 | New command CommandLineKEYS. |
| 26-Jun-2023 | ENCoding ANSI is replaced by WINCP using EDIT.ENCoding and SETUP.FILETYPE.ENCoding commands. |
| 04-Jan-2023 | New command DIALOG.NOYES. |
| 15-Sep-2022 | Added second parameter to SETUP.ASCIITEXT. |
| 04-Aug-2022 | New command EDIT.ENCoding. |
| 03-Jun-2022 | Marked SETUP.DropCoMmanD command as deprecated and replaced by new command SETUP.FILETYPE.DropCoMmanD. |
| |
| | PowerView Function Reference | 08-Aug-2024 | New functions api.SIMULINK.Enabled() and api.SIMULINK.PORT(). |
| 30-Jul-2024 | New function group, 'API Functions'. |
| 22-May-2024 | New function STRing.ComPare.Alpha(). |
| 03-May-2024 | New function group, 'CONNECTION Functions'. |
| 03-Mar-2024 | New function FILE.NEWHANDLE(). |
| 31-Jan-2023 | Solaris was removed as supported host OS. |
| 11-Nov-2022 | New function STRing.ESCapeQuotes(). |
| |
| | PPC400/PPC440 Debugger and Trace | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | PPC600 Family Debugger | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | PQIII Debugger | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | PRACTICE Script Language Reference Guide | 02-Nov-2022 | In the chapter 'Related Documents' a reference to ide_user.pdf has been added. |
| |
| | PRACTICE Script Language User's Guide | 02-Nov-2022 | In the chapter 'Related Documents' a reference to ide_user.pdf has been added. |
| |
| | Qorivva MPC5xxx/SPC5xx Debugger and NEXUS Trace | 10-Oct-2022 | New command SYStem.Mode.Prepare. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| 24-Jun-2022 | New command SYStem.Option.WaitBootRom. |
| |
| | RH850 Debugger and Trace | 17-Jan-2025 | New command SYStem.Option.CONFIGCLR. |
| 03-Mar-2024 | New commands: SYStem.Option.CIDA, SYStem.Option.CIDB, and SYStem.Option.CIDC. |
| 03-May-2023 | New command SYStem.Option.DUALPORT. |
| |
| | RISC-V Debugger and Trace | 12-Dec-2024 | Chapter 'RISC-V Tracing' added. A set of commands for configuring the trace infrastructure has been introduced. |
| 05-Aug-2024 | New command SYStem.Option.IrWidthDETECTION. |
| 02-Aug-2024 | MMU.DUMP, MMU.List, and MMU.SCAN commands updated: 'CPU specific Tables' descriptions added. |
| 24-Jul-2024 | New AccessPort RISC-V parameters for the SYStem.CONFIG command. A detailed description can be found in '<parameters> Configuring a RISC-V Debug Access Port'. |
| 22-Jul-2024 | New subchapter 'SMP Debugging - Multiple Debug Modules'. |
| 17-Nov-2023 | New command SYStem.Option.IsaEXTension. |
| 18-Aug-2023 | Marked SYStem.CONFIG.HARTINDEX as deprecated command and replaced by SYStem.CONFIG.HART.INDEX. |
| 17-Oct-2022 | New subchapter 'Vector Extension'. |
| 06-Oct-2022 | New subchapter: 'Hart State: Unavailable'. |
| 06-Oct-2022 | New command SYStem.Mode.StandBy. |
| 29-Aug-2022 | New command: SYStem.Option.DMACTiveRESet. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Setup of the Debugger for a CoreSight System | 10-Apr-2024 | The chapter 'Alternative Way to Access Memory' has been revised and renamed 'Memory Access Ports'. |
| |
| | SH2, SH3 and SH4 Debugger | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Simulator for 68K/ColdFire | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Simulator for ARC | 17-Jan-2023 | Added SETUP.DIS command. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Simulator for NIOS-II | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Simulator for SuperH | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | Simulator for XTENSA | 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
| | SneakPeek Debug Back-End | 08-Aug-2023 | Initial version of this manual. |
| |
| | System Trace User's Guide | 31-Dec-2024 | New command CPTrace.<aggregator>.<probe>.OPCODE. |
| 06-Nov-2023 | New command SYStem.CONFIG.CMN.DEViceName. |
| 31-Oct-2022 | New command CMN.CycleAccurate. |
| 29-Sep-2022 | New command CMN.TimeStampCLOCK. |
| 31-Aug-2022 | New commands CMN.MPAM and CMN.VERsion. |
| |
| | TRACE32 as GDB Front-End | 05-Nov-2024 | New commands SYStem.GDBconfig.CustomRegister.ADD and SYStem.GDBconfig.CustomRegister.RESet. |
| |
| | TRACE32 Concepts | 17-Oct-2023 | 'Observability Gap', 'Spot Breakpoint' added. |
| 17-Oct-2023 | Screenshot for 'StopAndGo Mode' was updated to show new display. |
| 28-Aug-2023 | 'MCDS in Infineon TriCore AURIX MCUs' added. |
| |
| | TRACE32 Installation Guide | 22-Jan-2025 | Configuration pictures were updated with PowerDebug X50, in chapter 'Tool Configuration'. |
| 06-Aug-2024 | New command line option --t32-api-rcl. |
| 03-Apr-2024 | Added new table and chapter 'Firewall Setup'. |
| 30-Jan-2024 | Added new command line option --t32-bootstatus in chapter 'Command Line Arguments for Starting TRACE32'. |
| 07-Jul-2023 | PowerTrace Serial replaced by PowerTrace Serial 2, in chapter 'Tools with PowerTrace Serial'. |
| 23-Jan-2023 | Solaris was removed as supported host OS. |
| 06-Dec-2022 | Configuration pictures were updated with PowerDebug E40 and PowerDebug X50, in chapter 'Tool Configuration'. |
| 30-Nov-2022 | All outdated configurations were deleted. |
| 05-Oct-2022 | Installation for Linux and macOS was updated. |
| |
| | TRACE32 Terminology | 20-Jul-2023 | Initial version of this manual. |
| |
| | Training Cortex-M Tracing | 29-Sep-2023 | Table of optional trace blocks for member of the Cortex-M family updated. |
| |
| | Training Script Language PRACTICE | 31-Jan-2023 | Solaris was removed as supported host OS. |
| 02-Nov-2022 | In the chapter 'Related Documents' has been added. |
| |
| | TriCore Debugger and Trace | 24-May-2024 | Updated commands SYStem.Option.IMASKASM and SYStem.Option.IMASKHLL. |
| 28-Aug-2023 | The chapter 'Simple Trace Control' has been renamed to 'Trace Control Using Break.Set or Var.Break.Set' and updated. |
| 07-Nov-2022 | Added chapters 'Code Overlays', 'Data Overlays', 'iAMP Debugging'. |
| 28-Oct-2022 | Updated command TrOnchip.SusTarget. |
| 07-Sep-2022 | Updated description of command: SYStem.Option.EndInitProtectionOverride. |
| 07-Sep-2022 | New commands: SYStem.Option.RUNRESTOREDELAY, and SYStem.Option.UNLOCKTIME. |
| |
| | XCP Debug Back-End | 14-Jun-2022 | Describe target resources and new command: SYStem.DETECT.XCPTRI. |
| |
| | Xtensa Debugger and Trace | 19-Dec-2024 | New command SYStem.Option.BREAKOUTMASKASM. |
| 27-Sep-2024 | New command SYStem.Option.RisingTDO. |
| 17-Nov-2022 | Chapter 'Xtensa Specific Benchmarking Commands' added. |
| 20-Jul-2022 | For the MMU.SCAN ALL command, CLEAR is now possible as an optional second parameter. |
| |
Download Complete Help System
help.zip (202 MByte/23-Jul-2025)
TRACE32 Debugger Getting Started
