Target Adaptation for MicroBlaze Debugger (with 16 pin connector) |
 
|
|||||
|
||||||
| ||||||
JTAG Connector for MicroBlaze
 |
 |
|
|
|
|
|
 Technical Support |
 |
|
This adaptation applies to the following product:
LA-3730 has the same pinout as LA-7723.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TDO | 1 |  |  | 2 | N/C |
| TDI | 3 | | | 4 | TRST- (*) |
| N/C | 5 | | | 6 | VCCS |
| TCK | 7 | | | 8 | N/C |
| TMS | 9 | | | 10 | N/C |
| HALT- | 11 | | | 12 | N/C |
| N/C | 13 | |  | 14 | KEY |
| N/C | 15 | | | 16 | GND |
 | |||||
- (*)Signal TRST not necessary for PPC403.
- All activ LOW signals need a pull-up. (10k recommended)
Dimension
Connector Type
- This is a standard 16 pin double row (two rows of eight pins) connector (pin to pin spacing: 0.100 in. / 2.54mm).
Picture
Order No.
Probe
|
Copyright © 2025 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 08-Jan-2025 |
