Target Adaptation for TI C2000/C5000/C6000/C7000 DSP
The embedded tools company
Debug Connector TI C2000/C5000/C6000/C7000 DSP
Target Connector ARM-20
Target Connector 20 pin: 2.54mm pin dimension




Support
Technical Support
 

Debug Connector TI C2000/C5000/C6000/C7000 DSP


Adaptation

The adaptation applies for the following TRACE32® products:

Order No.Probe
LA-2759JTAG Debugger for C7000 DSP (ICD) out of production
LA-3222Debugger for C2800 IDC20A (PACK) 
LA-3225Debugger for C5500 DSP IDC20A (PACK) 
LA-3226Debugger for C6000 IDC20A (PACK) 
LA-3227Debugger for C7000 DSP IDC20A (PACK) 
LA-7830JTAG Debugger for C5500 DSP (ICD) out of production
LA-7838JTAG Debugger for C6000 DSP (ICD) out of production
LA-7847JTAG Debugger for C2000 DSP (ICD) out of production
 

Target Connector ARM-20


Signal

Pin

 Pin

Signal

    
VREF-DEBUG12N/C
TRST-34GND
TDI56GND
TMS78GND
TCK910GND
RTCK1112GND
TDO1314GND
RESET-1516GND
N/C1718GND
N/C1920GND
    
Target connector, top-view

Converter

Lauterbach offers the following converters to adapt to target connectors differing from the pinout shown above:

Picture
Order No.
Probe
LA-3780
Converter IDC20A to TI-14/TI-20-Compact

Adaptation
LA-7748
Converter IDC20A to TI-14

Adaptation
 

Target Connector 20 pin: 2.54mm pin dimension


Target Connector Type

  • This is a standard 20 pin double row (two rows of 10 pins) connector (pin to pin spacing: 2.54mm/0.100").
  • If terminal strip without shroud is used, the spacing marked with "A" must be a minimum of 30.6mm/1.2".
  • Examples with housing: Samtec HTST-110-01-L-D (through-hole); Samtec HTST-110-01-L-DV (surface mount).
  • Examples without housing: Samtec TSW-110-23-L-D; Berg 67996-120H.




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024