Adaptation for Arm HSSTP
The embedded tools company



 

Target Adaptation of HSSTP Trace with other Connector


Picture
Order No.
Probe
LA-2749
Converter Samtec40 HSSTP to USB-C (DAM, D1)
LA-2788
Converter IDC20A/Samtec-40 HSSTP to RCAR-H3-S


Please contact your local Lauterbach representative for further adaptations.
 

Target Adaptation of HSSTP Trace with Samtec 40 Connector


Products

Order No.Probe
LA-3309Trace for Arm-ETM via Serial PrePro (PACK) 
LA-3310Trace for Arm-ETM via PT-Serial 4GB (PACK) 
LA-3320Trace for Arm-ETM via PT-Serial 8GB (PACK) 
LA-3332Trace for C6000 via Serial Prepro. (PACK) 
LA-3333Trace for C6000 via PT-Serial 4GB (PACK) 
LA-3334Trace for C6000 via PT-Serial 8GB (PACK) 
LA-3520PowerTrace Serial 4 GigaByte for ARM-ETM out of production
LA-3521Accessories PTSerial ARM-ETM 1-6 Lanes (PACK) 
LA-3576PowerTrace Serial 4 GigaByte for C6000 out of production
LA-3926Preproc. for C6000 DSP HSSTP HF-Flex out of production
LA-3945Aurora 2 Preprocessor for PowerTrace Serial 
LA-7988Preproc. for ARM-ETM/HSSTP HF-Flex out of production

Target Connector Type


SAMTEC Part NumberDescription
ASP-130367-01Rugged High Speed Socket 40 pin

Link to SAMTEC

Target Connector Placement

We recommend to place the even numbered pins at the PCB border side (flex cable won't be twisted).

Pinout of 40-pin Samtec Connector

Signal

Pin

 Pin

Signal

    
TXP[4]12VREF-DEBUG
TXN[4]34TCK|TCKC|SWCLK
GND56GND
TXP[2]78TMS|TMSC|SWDIO
TXN[2]910TRST-
GND1112GND
TXP[0]1314TDI
TXN[0]1516TDO|-|SWO
GND1718GND
CLKP1920RESET-
CLKN2122DBGRQ
GND2324GND
TXP[1]2526DBGACK
TXN[1]2728RTCK
GND2930GND
TXP[3]3132TRIGIN
TXN[3]3334TRIGOUT
GND3536RESERVED
TXP[5]3738RESERVED
TXN[5]3940RESERVED
    
Target connector, top-view, connect the two latch pins to GND


TRIGIN is an output (direction from target to trace tool). TRIGOUT is an input (direction from trace tool to target).


PTS/Debug Cable Serial Prepro./Debug Cable                                                                                                              

Tool Configuration with PowerTrace Serial and Debug Cable

The pinout of the 40-pin Samtec connector may include the debug signals which need to be connected to the Debug Cable. Since the PowerTrace Serial provides a 34-pin DEBUG connector for this purpose, a Converter IDC20A to MIPI-34 PowerTrace Serial is needed to connect the 20-pin connector of the Debug Cable to the 34-pin DEBUG connector of the PowerTrace Serial.




Alternatively the Debug Cable can be plugged to a dedicated 20-pin debug connector on the target. In this case it is recommended to NOT connect the debug signals (VREF-DEBUG, TCK, TMS, TRST-, TDI, TDO, RESET-, DBGRQ, DBGACK, RTCK) to the 40-pin Samtec connector.




Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany   Impressum     Privacy Policy
The information presented is intended to give overview information only.
Changes and technical enhancements or modifications can be made without notice. Report Errors
Last generated/modified: 07-Mar-2024