Adaptation for CoreSight HSSTP |
 
|
|||||
|
||||||
| ||||||
Target Adaptation of HSSTP Trace with other Connector
|
Please contact your local Lauterbach representative for more information.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Order No. | Probe |
|---|---|
| LA-3301 | Trace for RISC-V via PT-Serial 4GB (PACK) |
| LA-3314 | Trace for Xtensa® via PT-Serial 4GB (PACK) |
| LA-3315 | Trace for Xtensa® via PT-Serial 8GB (PACK) |
| LA-3318 | Trace for ARC® via PT-Serial 4GB (PACK) |
| LA-3319 | Trace for ARC® via PT-Serial 8GB (PACK) |
| LA-3321 | Trace for RISC-V via PT-Serial 8GB (PACK) |
| LA-3342 | Trace for VSPA via PT-Serial 4GB (PACK) |
| LA-3343 | Trace for VSPA via PT-Serial 8GB (PACK) |
| LA-3344 | Trace for VSPA via Serial Preprocessor (PACK) |
| LA-3532 | PowerTrace Serial 4 GigaByte for RISC-V out of production |
| LA-3535 | PowerTrace Serial 4 GigaByte for ARC out of production |
Target Connector Type
Target Connector Placement
We recommend to place the even numbered pins at the PCB border side (flex cable won't be twisted).
Pinout of 40-pin Samtec Connector
| Signal | Pin | Pin | Signal | ||
|---|---|---|---|---|---|
 | |||||
| TXP[4] | 1 |  |  | 2 | VREF-DEBUG |
| TXN[4] | 3 | | | 4 | TCK|TCKC|SWCLK |
| GND | 5 | | | 6 | GND |
| TXP[2] | 7 | | | 8 | TMS|TMSC|SWDIO |
| TXN[2] | 9 | | | 10 | TRST- |
| GND | 11 | | | 12 | GND |
| TXP[0] | 13 | | | 14 | TDI |
| TXN[0] | 15 | | | 16 | TDO|-|SWO |
| GND | 17 | | | 18 | GND |
| CLKP | 19 | | | 20 | RESET- |
| CLKN | 21 | | | 22 | DBGRQ |
| GND | 23 | | | 24 | GND |
| TXP[1] | 25 | | | 26 | DBGACK |
| TXN[1] | 27 | | | 28 | RTCK |
| GND | 29 | | | 30 | GND |
| TXP[3] | 31 | | | 32 | TRIGIN |
| TXN[3] | 33 | | | 34 | TRIGOUT |
| GND | 35 | | | 36 | RESERVED |
| TXP[5] | 37 | | | 38 | RESERVED |
| TXN[5] | 39 | | | 40 | RESERVED |
 | |||||
| Target connector, top-view, connect the two latch pins to GND | |||||
TRIGIN is an output (direction from target to trace tool). TRIGOUT is an input (direction from trace tool to target).
|
Copyright © 2024 Lauterbach GmbH, Altlaufstr.40, 85635 Höhenkirchen-Siegertsbrunn, Germany
Impressum
Privacy Policy
The information presented is intended to give overview information only. Changes and technical enhancements or modifications can be made without notice. Report Errors Last generated/modified: 07-Mar-2024 |
