Adaptation for Intel® Processor Trace

The adaptation applies for the following TRACE32® products

Converter

Picture

Order No.

Probe

LA-3818

Converter 2xMictor38/IDC20A to MIPI-60

Adaptation

LA-3870

Converter MIPI60-C/-P to Intel MIPI60

Adaptation

LA-3892

Conv. MIPI60-Q/-P or MIPI60-Cv2/-P to MIPI60

Adaptation

MIPI60-P of TRACE32 Preprocessor for Intel® PT AutoFocus MIPI60-P

Not all pins of the Intel® MIPI60 / Intel® MIPI60 Converged connector are connected to the Preprocessor for Intel® PT AutoFocus MIPI60-P. The not connected pins are printed in gray.

Signal	Pin			Pin	Signal
VREF_DEBUG	1			2	TMS
TCK0	3			4	TDO
TDI	5			6	No Connect
No Connect	7			8	No Connect
TRST_N	9			10	PREQ_N
PRDY_N	11			12	VREF_TRACE
PTI_0_CLK	13			14	No Connect
No Connect	15			16	No Connect
No Connect	17			18	No Connect
PTI_0_DATA[0]	19			20	No Connect
PTI_0_DATA[1]	21			22	No Connect
PTI_0_DATA[2]	23			24	No Connect
PTI_0_DATA[3]	25			26	No Connect
PTI_0_DATA[4]	27			28	No Connect
PTI_0_DATA[5]	29			30	No Connect
PTI_0_DATA[6]	31			32	No Connect
PTI_0_DATA[7]	33			34	No Connect
PTI_0_DATA[8]	35			36	No Connect
PTI_0_DATA[9]	37			38	No Connect
PTI_0_DATA[10]	39			40	No Connect
PTI_0_DATA[11]	41			42	No Connect
PTI_0_DATA[12]	43			44	No Connect
PTI_0_DATA[13]	45			46	No Connect
PTI_0_DATA[14]	47			48	No Connect
PTI_0_DATA[15]	49			50	No Connect
No Connect	51			52	No Connect
No Connect	53			54	No Connect
No Connect	55			56	No Connect
No Connect	57			58	No Connect
No Connect	59			60	No Connect
Connect metal plate to GND

Intel® MIPI60

The picture below shows the MIPI60 connector as specified by Intel®.

Signal	Pin			Pin	Signal
VREF_DEBUG	1			2	TMS
TCK0	3			4	TDO
TDI	5			6	No Connect
HOOK[6]=Reset In	7			8	10 kOhm to GND
TRST_N	9			10	PREQ_N
PRDY_N	11			12	VTREF_TRACE
PTI_0_CLK	13			14	PTI_1_CLK
POD_PRESENT1_N	15			16	GND
POD_PRESENT2_N	17			18	PTI_1_DATA[0]
PTI_0_DATA[0]	19			20	PTI_1_DATA[1]
PTI_0_DATA[1]	21			22	PTI_1_DATA[2]
PTI_0_DATA[2]	23			24	PTI_1_DATA[3]
PTI_0_DATA[3]	25			26	PTI_1_DATA[4]/PTI_2_DATA[0]
PTI_0_DATA[4]	27			28	PTI_1_DATA[5]/PTI_2_DATA[1]
PTI_0_DATA[5]	29			30	PTI_1_DATA[6]/PTI_2_DATA[2]
PTI_0_DATA[6]	31			32	PTI_1_DATA[7]/PTI_2_DATA[3]
PTI_0_DATA[7]	33			34	HOOK[7]=Reset Out
PTI_0_DATA[8]/PTI_3_DATA[0]	35			36	HOOK[3]=Boot Stall
PTI_0_DATA[9]/PTI_3_DATA[1]	37			38	HOOK[2]=CPU Boot Stall
PTI_0_DATA[10]/PTI_3_DATA[2]	39			40	HOOK[1]=Power Button
PTI_0_DATA[11]/PTI_3_DATA[3]	41			42	HOOK[0]=PWRGOOD
PTI_0_DATA[12]/PTI_3_DATA[4]	43			44	HOOK[5]
PTI_0_DATA[13]/PTI_3_DATA[5]	45			46	HOOK[4]
PTI_0_DATA[14]/PTI_3_DATA[6]	47			48	I2C_SCL
PTI_0_DATA[15]/PTI_3_DATA[7]	49			50	I2C_SDA
TCK1	51			52	GND
TRIG_INOUT	53			54	DBG_UART_TX
TRIG_IN	55			56	DBG_UART_RX
GND	57			58	GND
PTI_3_CLK	59			60	PTI_2_CLK
Connect metal plate to GND

Intel® MIPI60 Converged

The picture below shows the MIPI60 Converged connector as specified by Intel®.

Signal	Pin			Pin	Signal
VREF_DEBUG	1			2	TMS
TCK0	3			4	TDO
TDI	5			6	HOOK[7]=Reset Out
HOOK[6]=PMODE/Reset In	7			8	10 kOHM to GND
TRST_N	9			10	PREQ_N
PRDY_N	11			12	VTREF_TRACE
PTI_0_CLK	13			14	PTI_1_CLK
POD_PRESENT1_N	15			16	GND
POD_PRESENT2_N	17			18	PTI_1_DATA[0]
PTI_0_DATA[0]	19			20	PTI_1_DATA[1]
PTI_0_DATA[1]	21			22	PTI_1_DATA[2]
PTI_0_DATA[2]	23			24	PTI_1_DATA[3]
PTI_0_DATA[3]	25			26	PTI_1_DATA[4]/PTI_2_DATA[0]
PTI_0_DATA[4]	27			28	PTI_1_DATA[5]/PTI_2_DATA[1]
PTI_0_DATA[5]	29			30	PTI_1_DATA[6]/PTI_2_DATA[2]
PTI_0_DATA[6]	31			32	PTI_1_DATA[7]/PTI_2_DATA[3]
PTI_0_DATA[7]	33			34	No Connect
PTI_0_DATA[8]/PTI_3_DATA[0]	35			36	HOOK[3]=Boot Stall
PTI_0_DATA[9]/PTI_3_DATA[1]	37			38	HOOK[2]=CPU Boot Stall
PTI_0_DATA[10]/PTI_3_DATA[2]	39			40	HOOK[1]=Power Button
PTI_0_DATA[11]/PTI_3_DATA[3]	41			42	HOOK[0]=PWRGOOD
PTI_0_DATA[12]/PTI_3_DATA[4]	43			44	No Connect
PTI_0_DATA[13]/PTI_3_DATA[5]	45			46	No Connect
PTI_0_DATA[14]/PTI_3_DATA[6]	47			48	I2C_SCL
PTI_0_DATA[15]/PTI_3_DATA[7]	49			50	I2C_SDA
TCK1	51			52	No Connect
HOOK[9]	53			54	DBG_UART_TX
HOOK[8]	55			56	DBG_UART_RX
GND	57			58	GND
PTI_3_CLK	59			60	PTI_2_CLK
Connect metal plate to GND

Target Connector Type

Pins	Samtec Order No	Connector Type	Samtec ASP Nr.
60	QSH-030-01-L-D-A-K	high speed ground plane socket	- - - - -
SAMTEC catalog page

Cables for Connection to Target

Order-Nr.	Type
LA-1228	140 mm flex ext. for SAMTEC 60 pin QTH-QSH series
LA-1238	330 mm flex ext. for SAMTEC 60 pin QTH-QSH series long
Replacement flex extension can be ordered separately.